Part Number Hot Search : 
608X5 CXA1450M 1N5711 SNC15020 B772L 83C51 PMM3101 SC100
Product Description
Full Text Search
 

To Download DTA115TUA Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Transistors
DTA115TM / DTA115TE / DTA115TUA / DTA115TKA / DTA115TSA
Digital transistors (built-in resistor)
DTA115TM / DTA115TE / DTA115TUA / DTA115TKA / DTA115TSA
Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input, and parasitic effects are almost completely eliminated. 3) Only the on / off conditions need to be set for operation, making device design easy. 4) Higher mounting densities can be achieved. External dimensions (Unit : mm)
DTA115TM
0.2 1.2 0.8
(2) (3) (1)
0.2
1.2 0.32
0.4 0.4
0.5
0.22
0.8
0.15Max.
ROHM : VMT3
(1) Base (2) Emitter (3) Collector
(1) (2)
0.2 0.5 0.5
DTA115TE
0.3
(3)
0.13 0~0.1
0.8 1.6
0.15
0.2
0.55
0.1Min.
ROHM : EMT3 EIAJ : SC-75A
E E : Emitter C : Collector B : Base
ROHM : UMT3 EIAJ : SC-70
0.15
0.3
R1
(3)
1.25 2.1
(2)
1.3
0.2
Each lead has same dimensions
0.7 0.9
2.0
B
0.65 0.65
C
(1)
DTA115TUA
0~0.1
Equivalent circuit
0.7
1.0
1.6
(1) Emitter (2) Base (3) Collector
0.1Min.
(1) Emitter (2) Base (3) Collector
(1)
DTA115TKA
0.4
(3)
0~0.1
1.6 2.8
0.15
0.8
1.1
0.95 0.95 1.9 2.9
(2)
Each lead has same dimensions
0.3Min.
ROHM : SMT3 EIAJ : SC-59
(1) Emitter (2) Base (3) Collector
DTA115TSA
3
4
0~0.1
2
(15Min.)
3Min.
0.45
Taping specifications
2.5 5
0.5 0.45
ROHM : SPT EIAJ : SC-72
(1)(2)(3)
(1) Emitter (2) Collector (3) Base
Rev.A
1/2
Transistors
Absolute maximum ratings (Ta=25C)
Parameter
Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current
DTA115TM / DTA115TE / DTA115TUA / DTA115TKA / DTA115TSA
Symbol VCBO VCEO VEBO IC DTA115TM / DTA115TE DTA115TUA / DTA115TKA DTA115TSA PC Tj Tstg Limits -50 -50 -5 -100 150 200 300 150 -55 to +150 C C mW Unit V V V mA
Collector power dissipation
Junction temperature Storage temperature
Package, marking, and packaging specifications
Part No. Package Marking Packaging code Basic ordering unit (pieces)
DTA115TM VMT3 99 T2L 8000
DTA115TE EMT3 99 TL 3000
DTA115TUA DTA115TKA DTA115TSA UMT3 99 T106 3000 SMT3 99 T146 3000 SPT - TP 5000
Electrical characteristics (Ta=25C)
Parameter
Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Input resistance
Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE R1 fT
Min. -50 -50 -5 - - - 100 70 -
Typ. - - - - - - 250 100 250
Max. - - - -0.5 -0.5 -0.3 600 130 -
Unit V V V A A V - k MHZ IC= -50A IC= -1mA IE= -50A VCB= -50V VEB= -4V
Conditions
IC/IB= -1mA/-0.1mA IC= -1mA , VCE= -5V - VCE= -10V , IE=5mA , f=100MHZ
Transition frequency
Transition frequency of the device.
Electrical characteristics curves
1k 500
CORRECTOR SATURATION VOLTAGE : VCE(sat) (V)
VCE=5V
1 500m 200m 100m 50m 20m 10m 5m 2m 1m
Ta=25C
Ta=100C
IC/IB=10/1
DC CURRENT GAIN : hFE
200 100 50 20 10 5 2 1
10 20 50 100 200 500 1m 2m 5m 10m
Ta=100C Ta=25C
Ta= -40C
Ta= -40C
10
20
50 100 200
500 1m
2m
5m
10m
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
Fig.1 DC current gain vs. Collector current
Fig.2 Collector-Emitter saturation voltage vs. Collector current
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0


▲Up To Search▲   

 
Price & Availability of DTA115TUA

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X